 |
 |
|
 |
 |
 |

Syscal Junior
- Switch
48
Syscal
Junior Switch 72
| Switch Plus 3D
Resistivity Imaging Option
|
Syscal Junior Console
Brochure (PDF)
Resistivity Imaging For Environmental
Applications
-
Compact yet powerful
-
400 V - 100 W - 1.2 A
-
Automatic ranging
-
Automatic switching
SYSCAL Jr Switch-48 is a new all-in-one
multinode resistivity imaging system. It features an internal switching
board for 48 electrodes and an internal 100 W power source. The output
current is automatically adjusted (automatic ranging) to optimise the
input voltage values and ensure the best measurement quality. The system
is designed to automatically perform pre-defined sets of resistivity
measurements with roll-along capability. Two strings of cable with 24
electrode take-out each are connected on the back of the resistivity
meter. Made of heavy duty seismic cable, these strings are available with
standard 5 or 10 m electrode spacings. Customized cables may also
assembled for special arrays or non-standard applications.
Compact, easy-to-use and field proof, the SYSCAL Jr Switch-48 measures
both resistivity and chargeability (IP). It is ideal for environmental and
civil engineering applications such as pollution monitoring and mapping,
salinity control, depth-to-rock determination and weathered bedrock
mapping. It can also be used for shallow groundwater exploration (depth
and thickness of aquifers).
With the SYSCAL Jr Switch-48 resistivity surveys can be performed very
efficiently with one operator only.

(Please, Click on the Picture for a
Larger version)
RESISTIVITY IMAGING
-
Aim: imaging the underground geological structures through
surface electrical measurements
-
Principle: transmitting a current I through two electrodes
and measuring a voltage V with two other electrodes
-
Apparent resistivity: p = K*V/I, K depending on the electrode
separation
-
Resistivity pseudo-section: contoured plot of the apparent
resistivity data, using the electrode distance as a pseudo-depth
parameter
-
True resistivity section: contoured plot of the resistivity
distribution obtained through the inversion of the measured data
(using a non linear parameter fitting scheme)
-
Applications: environmental studies, groundwater
investigation, civil engineering, archaeology
FIELD LAY-OUT

|
Preset arrays (Wenner, dipole,…) or customized arrays
are uploaded through the user-friendly ELECTRE (version 2) PC software.
The roll-along capability is implemented. |

|

ACCURACY
-
Automatic SP compensation including linear drift
-
Digital stacking for noise reduction
-
Standard deviation computation
-
Noise may be monitored before injection
DATA INTERPRETATION SOFTWARE
-
RES2DINV or RESIX-2DI
(PC), for pseudo-section inversion to true
resistivity (and IP) 2D section.
-
RES3DINV (PC), for inversion to true resistivity (and IP) 3D data
OUTPUT CURRENT SPECIFICATIONS
-
Automatic ranging (microprocessor controlled)
-
Intensity: up to 1200 mA
-
Voltage: up to 400V (800V peak to peak)
-
Power: up to 100 W
-
Selectable cycle time of 0.5 , 1 or 2 s, programmable from 0.25 to
10 sec.
-
Current measurement precision: 0,5% typical.
INPUT VOLTAGE SPECIFICATIONS
-
Measuring process: automatic ranging and calibration
-
Input impedance : 20 MW minimum.
-
Input voltage protection up to 1000V, range from –10 V to +10 V.
-
Power line rejection
-
Voltage measurement precision: 0.5% typical
-
Noise reduction: continuous stacking selectable from 1 to 255
stacks.
-
SP compensation through automatic linear drift correction.
-
Resistivity accuracy: 0,5% typical
-
Induced polarization (chargeability) measured over four predefined
windows.
-
Chargeability accuracy: 1% of measured value for input voltage
higher than 10 mV.
GENERAL SPECIFICATIONS
-
Weather proof
-
Shock resistant fiber-glass case
-
Operating temperature: -20 to +70 °C
-
Dimensions: 31 x 23 x 35 cm. Weight: 11 kg
-
Internal memory for 2700 readings
-
Power supply: two internal rechargeable 12V, 7 Ah battery ; optional
external 12V backup car battery for transmitter power
-
Autonomy with internal battery: several thousands of readings
-
Standard string weight: 15 kg each for 5m spacing
Ordering Information
|
Description
|
|
Order Number
|
|
Syscal Jr. Switch 48
|
|
500-400-0185_48
|
|
 |
 |